Player.hr posvećuje veliku važnost zaštiti osobnih podataka naših korisnika. Politika zaštite privatnosti uređuje način postupanja s informacijama koje Player.hr obrađuje odnosno prikuplja prilikom posjeta našoj internet stranici. Napominjemo kako se obrada prikupljenih osobnih podataka temelji na jednoj od zakonitih osnova obrade u skladu s Općom uredbom o zaštiti podataka. Politika zaštite privatnosti obuhvaća:
Za potpuni tekst Politike privatnosti i Politike kolačića i detaljnije informacije o svakom pojedinom području molimo Vas da koristite poveznicu niže:
Dobrodošli Prijavi se ili Registracija
Proizvođač: | FBT HiMaxX 40a |
Dostupnost: | Na stanju |
Šifra Proizvoda: | 3715 |
Prikazana cjena je za komad. |
INCREDIBLE!!! STRONG LIKE A HORSE!!! Processed Active Monitor 2-Way Bi-Amp Processed Active Monitor System > 500W Class D (LF) + 150W Class G (HF) Power Amplifiers. Comparing with the FBTMaxX 4a, these new built in-amplifiers offer an increased power capacity of +200W for the LF woofer and +50W for the HF driver. Peak power has almost doubled with up to 1000W for the LF woofer > +4dB more SPL (@ 1mt / music signal), thanks to the higher power handling, to a woofer offering a lower power compression and to a more sophisticated limiting circuit. > Increased efficiency with the addition of the very latest switch mode power supply and a Class G amplifier for the HF compression driver > Excellent WEIGHT/POWER ratio. HiMaxX 40a weighs just a bit more than the FBTMaxX 4a while the total power capacity has almost doubled > New FBT proprietary designed 12” (3” VC) B&C® custom made neodymium magnet woofer, has a more efficient ventilation system resulting in a 1.5dB reduction of power compression and a more rigid cone for increased reliability. The internal coil has 75mm (3”) diameter for greater power handling and reliability > New B&C® 1” (1.7” VC) HF compression driver with shorting copper cup for improved extension and efficiency in the mid-frequencies and lower distortion. The coil measures 44mm (1.7”) diameter and the driver is coupled to a 90°H x 60°V constant directivity horn > New FBT proprietary gas-injection polypropylene moulded asymmetrical trapezoidal design enclosure of extremely high quality, lightness, strength, resistance, flexibility and applications. The total volume increases +5Lt of load to the woofer, maintaining the same width and height of the FBTMaxX4 model, whilst producing a more powerful bass response. The reflex tuning ports are newly designed and optimised to reduce turbulences and compression. > The newly designed control panel features: - Combined Gain and Volume functions in the same rotary potentiometer offer easier and quicker control and provide an improved dynamic range and S/N ratio at the input stage - MIC/LINE input selector with Peak led - 2 independent input channels (1 x XLR/Jack, 1 x AUX L/R Cinch RCA with volume) to connect also external devices such as MP3, CD, PC, players. This feature may replace the use of an external mixer in such applications like: microphone music base - 3-band equalization (High/Mid/Low) - Ground Lift switch - 3 x Status LEDs: Power, Limiter, Protection HiMaxX 40a - Specifications Model HiMaxX 40a Configuration way 2 Built-in amplifier LF/HF W rms 500/150 Frequency response @-6dB 45Hz - 20KHz Low frequency woofer inch 1x12 - 3 coil High frequency driver inch 1 - 1.7coil Sensitivity (@1W/1m) dB 99 Maximum SPL dB 127 Dispersion H x V 90° x 60° Input impedance kOhm 22 Crossover frequency kHz 1,6 Input connectors XLR with loop RCA aux Power cord m/ft 5 / 16.4” Net dimensions (WxHxD) mm/inch 407x634x370 / 16.02x24.96x14.56 Net weight kg/Lb 17,9 / 39.46 Shipping dimensions (WxHxD) mm/inch 495x720x470 / 19.48x28.34x18.50 Shipping weight kg/Lb 20,5 / 45.19
Processed Active Monitor
2-Way Bi-Amp Processed Active Monitor System > 500W Class D (LF) + 150W Class G (HF) Power Amplifiers. Comparing with the FBTMaxX 4a, these new built in-amplifiers offer an increased power capacity of +200W for the LF woofer and +50W for the HF driver. Peak power has almost doubled with up to 1000W for the LF woofer > +4dB more SPL (@ 1mt / music signal), thanks to the higher power handling, to a woofer offering a lower power compression and to a more sophisticated limiting circuit. > Increased efficiency with the addition of the very latest switch mode power supply and a Class G amplifier for the HF compression driver > Excellent WEIGHT/POWER ratio. HiMaxX 40a weighs just a bit more than the FBTMaxX 4a while the total power capacity has almost doubled > New FBT proprietary designed 12” (3” VC) B&C® custom made neodymium magnet woofer, has a more efficient ventilation system resulting in a 1.5dB reduction of power compression and a more rigid cone for increased reliability. The internal coil has 75mm (3”) diameter for greater power handling and reliability > New B&C® 1” (1.7” VC) HF compression driver with shorting copper cup for improved extension and efficiency in the mid-frequencies and lower distortion. The coil measures 44mm (1.7”) diameter and the driver is coupled to a 90°H x 60°V constant directivity horn > New FBT proprietary gas-injection polypropylene moulded asymmetrical trapezoidal design enclosure of extremely high quality, lightness, strength, resistance, flexibility and applications. The total volume increases +5Lt of load to the woofer, maintaining the same width and height of the FBTMaxX4 model, whilst producing a more powerful bass response. The reflex tuning ports are newly designed and optimised to reduce turbulences and compression. > The newly designed control panel features: - Combined Gain and Volume functions in the same rotary potentiometer offer easier and quicker control and provide an improved dynamic range and S/N ratio at the input stage - MIC/LINE input selector with Peak led - 2 independent input channels (1 x XLR/Jack, 1 x AUX L/R Cinch RCA with volume) to connect also external devices such as MP3, CD, PC, players. This feature may replace the use of an external mixer in such applications like: microphone music base - 3-band equalization (High/Mid/Low) - Ground Lift switch - 3 x Status LEDs: Power, Limiter, Protection
|