Dobrodošli Prijavi se ili Registracija

Radno vrijeme:
Ponedjeljak - petak od 09:00 do 17:00
Subotom od 09:00 do 13:00
Nedjeljom i blagdanima zatvoreno
Cvijete Zuzorić 7, 10 000 Zagreb
(kod McDonaldsa na Krugama)
+385 97 714 8673
+385 95 855 9005
+385 1 889 55 35
+385 1 889 56 85
info@player.hr

Rane SAC 23 Stereo Crossover


Proizvođač: Rane SAC 23 Stereo Crossover
Dostupnost: Na stanju
Šifra Proizvoda: 3551
Prikazana cjena je za komad.

Simple Division. You do the math. Any way you add it up, Rane makes the finest crossovers. There is no simpler or smarter way to triamp your system than with the SAC 23 Stereo Active Crossover. The SAC 23 employs state-variable 4th-order Linkwitz-Riley filter alignments to minimize phase difficulties in the critical crossover region. Simply put, a Linkwitz-Riley crossover exhibits identical phase characteristics on its Low pass and High pass Outputs. This characteristic guarantees in-phase outputs at all frequencies. In-phase outputs are mandatory for proper acoustic summing of common signals from adjacent drivers in the crossover region. An added benefit of this topology is steep 24 dB per octave rolloff slopes. A slope of this magnitude guarantees drivers designed to produce a specific range of frequencies, and no more, will not be driven past their limits, thereby minimizing distortion and driver fatigue. The SAC 23 utilizes 31-position precision DC control voltage potentiometers to select the Low/Mid and Mid/High Frequency points. This crossover circuit design assures consistent accuracy from channel-to-channel and unit-to-unit. This is a distinct advantage over continuously variable designs using ganged potentiometers which can yield large variations in channel-to-channel matching. The Mono Sub Output provides a separate mono sum of the Left and Right Low Outputs. A 100 Hz low pass filter may be activated for this Output. The Sub Output may be used along with the Left and Right Low Outputs. The Input Level allows decreasing the overall sensitivity of the entire sound system, including the mono subwoofer if one is used. The Low Level, Mid Level, High Level and Mono Sub Output Level controls allow compensation for sensitivity variations in amplifiers and drivers. The SAC 23 features balanced XLR connectors that when properly connected, can drive long lines without fear of hum or noise. DJ Commercial Audio Public Address Home Recording Pro Audio Pro Recording Features - Precise Channel Matching with Single Set of Controls. - 3 -Position Frequency Selector. - High, Mid, Low and Mono Subwoofer Output Level Controls. - +4 dBu and Overload Indicators. - 24 dB/Octave Linkwitz-Riley Filters. - Separate Mono Subwoofer Output. - Balanced XLR Connectors. - Internal AC Power Supply Meets CE Requirements. Details Model SAC 23 Product Type Stereo Crossover Part Number 109225 Crossover Details Alignment Linkwitz-Riley Slope 24 dB per Octave Range Low/Mid 80 Hz-1 kHz Range Mid/High 350 Hz-7 kHz Control Stereo Tracking 2% Accuracy 10% Inputs: Type Active Balanced Connectors XLR Impedance 20k Maximum Level +20 Gain Range Off to +6 Outputs: Type Active Balanced Connectors XLR Impedance 100 Maximum Level +20 Gain Range Off to +0 Mono Sub Details Filter 100 Hz Low Pass Gain Trim Off to +0 RFI Filters Yes Infrasonic Filters 15 Hz, 18 dB per octave Frequency Response 15 Hz-40 kHz THD+Noise 0.20% Signal-to-Noise Ratio 84 Indicators Details +4 dBu +4 dBu OverLoad 3 dB Before Clip Power Unit On Construction All Steel Weight 5 lb Shipping Weight 8 lb Dimensions 1.75”H x 19”W x 5.3”D (1U) Shipping Size 4.25” x 20.3” x 13.75”


kn 3.173,00
€ 419.11

Simple Division. You do the math. Any way you add it up, Rane makes the finest crossovers. There is no simpler or smarter way to triamp your system than with the SAC 23 Stereo Active Crossover.

The SAC 23 employs state-variable 4th-order Linkwitz-Riley filter alignments to minimize phase difficulties in the critical crossover region. Simply put, a Linkwitz-Riley crossover exhibits identical phase characteristics on its Low pass and High pass Outputs. This characteristic guarantees in-phase outputs at all frequencies. In-phase outputs are mandatory for proper acoustic summing of common signals from adjacent drivers in the crossover region. An added benefit of this topology is steep 24 dB per octave rolloff slopes. A slope of this magnitude guarantees drivers designed to produce a specific range of frequencies, and no more, will not be driven past their limits, thereby minimizing distortion and driver fatigue.

The SAC 23 utilizes 31-position precision DC control voltage potentiometers to select the Low/Mid and Mid/High Frequency points. This crossover circuit design assures consistent accuracy from channel-to-channel and unit-to-unit. This is a distinct advantage over continuously variable designs using ganged potentiometers which can yield large variations in channel-to-channel matching.

The Mono Sub Output provides a separate mono sum of the Left and Right Low Outputs. A 100 Hz low pass filter may be activated for this Output. The Sub Output may be used along with the Left and Right Low Outputs.

The Input Level allows decreasing the overall sensitivity of the entire sound system, including the mono subwoofer if one is used. The Low Level, Mid Level, High Level and Mono Sub Output Level controls allow compensation for sensitivity variations in amplifiers and drivers.

The SAC 23 features balanced XLR connectors that when properly connected, can drive long lines without fear of hum or noise.
DJ
Commercial Audio
Public Address
Home Recording
Pro Audio
Pro Recording
Features
- Precise Channel Matching with Single Set of Controls.
- 3 -Position Frequency Selector.
- High, Mid, Low and Mono Subwoofer Output Level Controls.
- +4 dBu and Overload Indicators.
- 24 dB/Octave Linkwitz-Riley Filters.
- Separate Mono Subwoofer Output.
- Balanced XLR Connectors.
- Internal AC Power Supply Meets CE Requirements.
Details
Model SAC 23
Product Type Stereo Crossover
Part Number 109225
Crossover Details
Alignment Linkwitz-Riley
Slope 24 dB per Octave
Range Low/Mid 80 Hz-1 kHz
Range Mid/High 350 Hz-7 kHz
Control Stereo
Tracking 2%
Accuracy 10%
Inputs: Type Active Balanced
Connectors XLR
Impedance 20k
Maximum Level +20
Gain Range Off to +6
Outputs: Type Active Balanced
Connectors XLR
Impedance 100
Maximum Level +20
Gain Range Off to +0
Mono Sub Details
Filter 100 Hz Low Pass
Gain Trim Off to +0
RFI Filters Yes
Infrasonic Filters 15 Hz, 18 dB per octave
Frequency Response 15 Hz-40 kHz
THD+Noise 0.20%
Signal-to-Noise Ratio 84
Indicators Details
+4 dBu +4 dBu
OverLoad 3 dB Before Clip
Power Unit On
Construction All Steel
Weight 5 lb
Shipping Weight 8 lb
Dimensions 1.75”H x 19”W x 5.3”D (1U)
Shipping Size 4.25” x 20.3” x 13.75”



Nazad na kategoriju Aktivne Skretnice