Dobrodošli Prijavi se ili Registracija

Radno vrijeme:
Ponedjeljak - petak od 09:00 do 17:00
Subotom od 09:00 do 13:00
Nedjeljom i blagdanima zatvoreno
Cvijete Zuzorić 7, 10 000 Zagreb
(kod McDonaldsa na Krugama)
+385 97 714 8673
+385 95 855 9005
+385 1 889 55 35
+385 1 889 56 85
info@player.hr

Shure BETA 52A


Proizvođač: Shure BETA 52A
Dostupnost: Na stanju
Šifra Proizvoda: 6223
Prikazana cjena je za komad.

The Shure Beta 52®A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels.  The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.FEATURES: Frequency response shaped specifically for kick drums and bass instruments Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum Studio quality performance, even at extremely high sound pressure levels Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise Hardened steel mesh grille that resists wear and abuse Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Neodymium magnet for high signal–to–noise ratio output Low sensitivity to varying load impedance Legendary Shure quality and reliability   TypeDynamic (moving coil)Frequency Response20 to 10,000 Hz View LargerNOTE: The curve shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.      Polar PatternSupercardioid, rotationally symmetrical about microphone axis             Output Level (at 1,000 Hz)Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPLImpedanceRated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low ZPhasingPositive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3Maximum SPL174 dB at 1000 Hz (calculated)ConnectorThree-pin professional audio connector (male XLR type)CaseSilver blue enamel-painted die cast metal with hardened, matte-finished steel grilleAdjustable, Locking Stand AdapterIntegral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 threadNet Weight605 grams (21.6 oz)  


kn 1.515,00
€ 200.13

The Shure Beta 52®A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels. 

The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.

FEATURES:

  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability

 

Type
Dynamic (moving coil)
Frequency Response
20 to 10,000 Hz
NOTE: The curve shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
     Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis
             Output Level (at 1,000 Hz)
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)
*1 Pa = 94 dB SPL

Impedance
Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z
Phasing
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Maximum SPL
174 dB at 1000 Hz (calculated)
Connector
Three-pin professional audio connector (male XLR type)
Case
Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille
Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread
Net Weight
605 grams (21.6 oz)

 



Nazad na kategoriju Bubanj (DrumSet)