Dobrodošli Prijavi se ili Registracija

Radno vrijeme:
Ponedjeljak - petak od 09:00 do 17:00
Subotom od 09:00 do 13:00
Nedjeljom i blagdanima zatvoreno
Cvijete Zuzorić 7, 10 000 Zagreb
(kod McDonaldsa na Krugama)
+385 97 714 8673
+385 95 855 9005
+385 1 889 55 35
+385 1 889 56 85
info@player.hr

Martin Wisman CA 1200


Proizvođač: Martin Wisman CA 1200
Dostupnost: Nema na stanju
Šifra Proizvoda: 6318
Prikazana cjena je za komad.

CA 1200 Professional Power Amplifier Description The CA Series professional power amplifiers offer Martin Wisman renowned integrity and can handle exceptionally high power ratings in a compact, light weight 2RU package. The CA Series amps also feature Automatic Clip Limiting to protect connected drivers; Impedance sensing to accommodate varying impedance outputs; tunnel cooled, high efficiency heat sinks; and variable speed DC fans to limit the operating temperature and extend amplifier life.   Specifications Rated power bridge mode 4 Ohms: 1350 Watts @ 1 kHz at <0.1% T.H.D. Rated power (2 X 2 Ohms): 675 Watts per channel @ 1 kHz at <0.1%T.H.D.both channels driven Rated power (2 X4 Ohms): 450 Watts per channel @ 1 kHz at <0.05%T.H.D. both channels driven Rated power (2 X 8 Ohms): 300 Watts per channel @ 1 kHz at <0.025%T.H.D.both channels driven Rated power (1 X 2 Ohms): 750 Watts @ 1 kHz at <0.1% T.H.D. Power bandwidth: 10 Hz - 30kHz; +0, -3 dB at rated 350 Watts 8 Ohm power T.H.D.(2 X 2 Ohms): <0.1%@900 Watts per channel from 20 HZ to 20 kHz T.H.D.(2 X 4 Ohms): <0.1%@600 Watts per channel from 20 HZ to 20 kHz T.H.D.(2 X 8 Ohms): <0.1%@400 Watts per channel from 20 HZ to 20 kHz Input CMRR: >-65 dB @ 1 kHz Rated power (1 X4 Ohms): 840 Watts @ 1 kHz at <0.05% T.H.D. Rated power (1 X 8 Ohms): 560 Watts @ 1 kHz at <0.025% T.H.D. Minimum load impedance: 2 Ohms Maximum RMS voltage swing: 77 Volts Frequency response: 10 Hz - 100 kHz; +0, -3 dB at 1 Watt Phase response: +5 to -15 from 20 Hz to 20 kHz Input impedance: 10 k Ohms, balanced Cooling: Two temperature dependant variable speed80mm high output DC fans Controls: Two front panel attenuators, rear panel modeswitch and gain select switch Voltage gain: 0.775V, 32 dB or 26 dB Crosstalk: >-60 dB @ 1 kHz at rated power @ 8 Ohms Hum and noise: >-107 dB, "A" weighted referenced to rated power @ 8 Ohms Slew rate: >30V/us Damping factor (8 Ohms): >700:1 @ 20Hz - 1 kHz Indicator LEDs: 2 Clip,2 signal presence, 1 active status,2 Protection Protection: Thermal, DC, turn-on bursts, subsonic, incorrect loads Connectors: XLR, Speakon and Binding Post speaker output, 240/230 Volt 20 amp IEC mains Construction: 16 ga. Steel Dimensions: 89 mm x 483 mm x 496 mm Net weight: 23 kg Gross weight: 26 kg  


kn 2.931,00
€ 394.35

 


CA 1200 Professional Power Amplifier
 

Description

 




The CA Series professional power amplifiers offer Martin Wisman renowned integrity and can handle exceptionally high power ratings in a compact, light weight 2RU package. The CA Series amps also feature Automatic Clip Limiting to protect connected drivers; Impedance sensing to accommodate varying impedance outputs; tunnel cooled, high efficiency heat sinks; and variable speed DC fans to limit the operating temperature and extend amplifier life.

 

 

Specifications

 
 

Rated power bridge mode 4 Ohms: 1350 Watts @ 1 kHz at <0.1% T.H.D.
Rated power (2 X 2 Ohms): 675 Watts per channel @ 1 kHz at <0.1%
T.H.D.both channels driven
Rated power (2 X4 Ohms): 450 Watts per channel @ 1 kHz at <0.05%
T.H.D. both channels driven
Rated power (2 X 8 Ohms): 300 Watts per channel @ 1 kHz at <0.025%
T.H.D.both channels driven
Rated power (1 X 2 Ohms): 750 Watts @ 1 kHz at <0.1% T.H.D.
Power bandwidth: 10 Hz - 30kHz; +0, -3 dB at rated 350 Watts 8 Ohm power
T.H.D.(2 X 2 Ohms): <0.1%@900 Watts per channel from 20 HZ to 20 kHz
T.H.D.(2 X 4 Ohms): <0.1%@600 Watts per channel from 20 HZ to 20 kHz
T.H.D.(2 X 8 Ohms): <0.1%@400 Watts per channel from 20 HZ to 20 kHz
Input CMRR: >-65 dB @ 1 kHz
Rated power (1 X4 Ohms): 840 Watts @ 1 kHz at <0.05% T.H.D.
Rated power (1 X 8 Ohms): 560 Watts @ 1 kHz at <0.025% T.H.D.
Minimum load impedance: 2 Ohms
Maximum RMS voltage swing: 77 Volts
Frequency response: 10 Hz - 100 kHz; +0, -3 dB at 1 Watt
Phase response: +5 to -15 from 20 Hz to 20 kHz
Input impedance: 10 k Ohms, balanced
Cooling: Two temperature dependant variable speed
80mm high output DC fans
Controls: Two front panel attenuators, rear panel mode
switch and gain select switch
Voltage gain: 0.775V, 32 dB or 26 dB
Crosstalk: >-60 dB @ 1 kHz at rated power @ 8 Ohms
Hum and noise: >-107 dB, "A" weighted referenced to rated power @ 8 Ohms
Slew rate: >30V/us
Damping factor (8 Ohms): >700:1 @ 20Hz - 1 kHz
Indicator LEDs: 2 Clip,2 signal presence, 1 active status,2 Protection
Protection: Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors: XLR, Speakon and Binding Post speaker output, 240/230 Volt 20 amp IEC mains
Construction: 16 ga. Steel
Dimensions: 89 mm x 483 mm x 496 mm
Net weight: 23 kg
Gross weight: 26 kg

 



Nazad na kategoriju Do 2 x 600W @4Ω