Nazovite: 097 714 8673   01/8895535  
+
×

NEUTRIK NC3MXX

Šifra: 6684
Na stanju
5,00 EUR
PDV uračunat u cijenu
Prikazana cijena je za komad.
Količina

Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr

Prijavi povoljniju cijenu Obavijesti me ako cijena padne Postavi pitanje
Opcija:

Neutrik // NC3MXX - XLR Male connector

XLR male connector for cable, 3 pins
Neutrik code = NC-3-MXX





The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
3 pole male cable connector with Nickel housing and silver contacts.







Features & Benefits

Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, longlasting and dependable
Internal thread on shell is well proteced against any damage









There are no technical infos for this product.(210_941666173)







Product


Connector Type
XLR


Gender
male


Electrical


Capacitance between contacts
≤ 4 pF


Contact resistance
≤ 3 mΩ


Dielectric strength
1,5 kVdc


Insulation resistance
> 2 GΩ (initial)


Insulation resistance
> 1 GΩ (after damp heat test)


Rated current per contact
16 A


Rated voltage
50 V


Mechanical


Cable O.D.
3.5 - 8.0 mm


Insertion force
≤ 20 N


Withdrawal force
≤ 20 N


Lifetime
> 1000 mating cycles


Wire size
max. 2.5 mm²


Wire size
max. 14 AWG


Wiring
Solder contacts


Locking device
latch lock


Material


Boot
Polyuretan


Bushing
Polyamide (PA 6 15% GR)


Contact plating
2 µm Ag


Contacts
Brass (CuZn39Pb3)


Insert
Polyamide (PA 6.6 30 % GR)


Locking element
Zinc diecast (ZnAl4Cu1)


Shell
Zinc diecast (ZnAl4Cu1)


Shell plating
Nickel


Strain relief
Polyacetal (POM)


Environmental


Flammability
UL 94 HB


Standard compliance
IEC 61076-2-103


Protection class
IP 40


Solderability
Complies with IEC 68-2-20


Temperature range
-30 °C to +80 °C







Neutrik // NC3MXX - XLR Male connector

  • XLR male connector for cable, 3 pins
  • Neutrik code = NC-3-MXX

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

3 pole male cable connector with Nickel housing and silver contacts.

 

Features & Benefits

    • Male connector with improved locking recess without "window", more stringent housing increases durability
    • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
    • Boot with polyurethane gland gives high protection to cable bending stresses
    • Colored rings and boots available for coding or identification
    • Sleek and ergonomic design - valuable and handy
    • Rugged zinc diecast shell, longlasting and dependable
    • Internal thread on shell is well proteced against any damage

Product
Connector Type XLR
Gender male
Electrical
Capacitance between contacts ≤ 4 pF
Contact resistance ≤ 3 mΩ
Dielectric strength 1,5 kVdc
Insulation resistance > 2 GΩ (initial)
Insulation resistance > 1 GΩ (after damp heat test)
Rated current per contact 16 A
Rated voltage 50 V
Mechanical
Cable O.D. 3.5 - 8.0 mm
Insertion force ≤ 20 N
Withdrawal force ≤ 20 N
Lifetime > 1000 mating cycles
Wire size max. 2.5 mm²
Wire size max. 14 AWG
Wiring Solder contacts
Locking device latch lock
Material
Boot Polyuretan
Bushing Polyamide (PA 6 15% GR)
Contact plating 2 µm Ag
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Locking element Zinc diecast (ZnAl4Cu1)
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel
Strain relief Polyacetal (POM)
Environmental
Flammability UL 94 HB
Standard compliance IEC 61076-2-103
Protection class IP 40
Solderability Complies with IEC 68-2-20
Temperature range -30 °C to +80 °C
Ocena:

Vezani artikli


Srodni proizvodi

NEUTRIK NC3FXX

5,00 EUR
Dodaj u košaricu