Dobrodošli Prijavi se ili Registracija

Radno vrijeme:
Ponedjeljak - petak od 09:00 do 17:00
Subotom od 09:00 do 13:00
Nedjeljom i blagdanima zatvoreno
Cvijete Zuzorić 7, 10 000 Zagreb
(kod McDonaldsa na Krugama)
+385 97 714 8673
+385 95 855 9005
+385 1 889 55 35
+385 1 889 56 85
info@player.hr

Martin Wisman CA 3600


Proizvođač: Martin Wisman CA 3600
Dostupnost: Na stanju
Šifra Proizvoda: 5092
Prikazana cjena je za komad.

Professional Power Amplifier The CA Series professional power amplifiers offer Martin Wisman renowned integrity and can handle exceptionally high power ratings in a compact, light weight 3RU package. The M Series amps also feature Automatic Clip Limiting to protect connected drivers;Impedance sensing to accommodate varying impedance outputs;tunnel-cooled,high efficiency heat sinks; and variable-speed DC fans to limit the operating temperature and extend amplifier life.   Specifications Rated power bridge mode 8 Ohms 3600Watts @ 1 kHz at <0.5% T.H.D. Rated power (2 X4 Ohms): 1800 Watts per channel @ 1 kHz at <0.5% T.H.D. both channels driven Rated power (2 X 8 Ohms): 1200 Watts per channel @ 1 kHz at <0.5% T.H.D.both channels driven Power bandwidth: 20 Hz - 20kHz; +0, -0.5 dB at rated 500 Watts 8 Ohm power T.H.D.(2 X 4 Ohms): <0.05%@900 Watts per channel from 20 HZ to 20 kHz T.H.D.(2 X 8 Ohms): <0.05%@600Watts per channel from 20 HZ to 20 kHz Minimum load impedance: 2 Ohms Maximum RMS voltage swing: 110Volts Frequency response: 10 Hz - 50 kHz; +0, -3 dB at 1 Watt Input CMRR: >-65 dB @ 1 kHz Rated power (1 X 4 Ohms): 1980 Watts @ 1 kHz at <0.5% T.H.D. Rated power (1 X 8 Ohms): 1300 Watts @ 1 kHz at <0.5% T.H.D. Phase response: +20 to -25 from 20 Hz to 20 kHz Input impedance: 20 k Ohms, balanced; 10k Ohms, unbalanced Cooling: Tow temperature dependant variable speed 120mm high output DC fans Controls: Two front panel attenuators, rear panel mode switch and gain select switch Voltage gain: 0.775V, 32 dB or 26 dB Crosstalk: >-60 dB @ 1 kHz at rated power @ 8 Ohms Hum and noise: >-104 dB, "A" weighted referenced to rated power @ 8 Ohms Slew rate: >25V/us Damping factor (8 Ohms): >800:1 @ 20Hz - 1 kHz Indicator LEDs: 2 Clip,2 signal presence, 2 active status, 2Protection Protection: Thermal, DC, turn-on bursts, incorrect loads Connectors: XLR, Speakon and Binding Post speaker output, 240/230 Volt 20 amp IEC mains Construction: 16 ga. Steel Dimensions: 132mm x 483 mm x 498 mm Net weight: 36kg Gross weight: 39kg


kn 7.242,00 kn 6.694,00
€ 884.25

Professional Power Amplifier



The CA Series professional power amplifiers offer Martin Wisman renowned integrity and can handle exceptionally high power ratings in a compact, light weight 3RU package. The M Series amps also feature Automatic Clip Limiting to protect connected drivers;Impedance sensing to accommodate varying impedance outputs;tunnel-cooled,high efficiency heat sinks; and variable-speed DC fans to limit the operating temperature and extend amplifier life.



Specifications

 

Rated power bridge mode 8 Ohms 3600Watts @ 1 kHz at <0.5% T.H.D.
Rated power (2 X4 Ohms): 1800 Watts per channel @ 1 kHz at <0.5%
T.H.D. both channels driven
Rated power (2 X 8 Ohms): 1200 Watts per channel @ 1 kHz at <0.5%
T.H.D.both channels driven
Power bandwidth: 20 Hz - 20kHz; +0, -0.5 dB at rated 500 Watts 8 Ohm power
T.H.D.(2 X 4 Ohms): <0.05%@900 Watts per channel from 20 HZ to 20 kHz
T.H.D.(2 X 8 Ohms): <0.05%@600Watts per channel from 20 HZ to 20 kHz
Minimum load impedance: 2 Ohms
Maximum RMS voltage swing: 110Volts
Frequency response: 10 Hz - 50 kHz; +0, -3 dB at 1 Watt
Input CMRR: >-65 dB @ 1 kHz
Rated power (1 X 4 Ohms): 1980 Watts @ 1 kHz at <0.5% T.H.D.
Rated power (1 X 8 Ohms): 1300 Watts @ 1 kHz at <0.5% T.H.D.
Phase response: +20 to -25 from 20 Hz to 20 kHz
Input impedance: 20 k Ohms, balanced; 10k Ohms, unbalanced
Cooling: Tow temperature dependant variable speed 120mm high output DC fans
Controls: Two front panel attenuators, rear panel mode switch and gain select switch
Voltage gain: 0.775V, 32 dB or 26 dB
Crosstalk: >-60 dB @ 1 kHz at rated power @ 8 Ohms
Hum and noise: >-104 dB, "A" weighted referenced to rated power @ 8 Ohms
Slew rate: >25V/us
Damping factor (8 Ohms): >800:1 @ 20Hz - 1 kHz
Indicator LEDs: 2 Clip,2 signal presence, 2 active status, 2Protection
Protection: Thermal, DC, turn-on bursts, incorrect loads
Connectors: XLR, Speakon and Binding Post speaker output,
240/230 Volt 20 amp IEC mains
Construction: 16 ga. Steel
Dimensions: 132mm x 483 mm x 498 mm
Net weight: 36kg
Gross weight: 39kg



Nazad na kategoriju Preko 2 x 1000 W @4Ω