Politika privatnosti i Politika kolačića

Martin Wisman UL Q1200

UL-Q 12004-Channel Power Amplifier Independent Bassand Treblecontrol for each channel. Three power configerations ; four channe!4 X 200W, 3 channel 2 X 200W + 1 X 600W or 2 channel 2X600W. Individual fourchannel inputs and switchable global bus input, independent volume control for 4 channels, recessed Treble and Bass control, Independent signal indication, independent clipindication. *Bridge modeswitch forchannel 1&2 andchannel 3&4, bridge and common protection LED indicators. •Balance BUS IN available. 8 Ohm stereo  4X200W 4 Ohm stereo  4X300W 8 Ohms bridged  2X600W Weight 16kg Minimum Guaranteed Power 1 kHz with 0.5%THD 4-Channel, 8 ohms     4X200W 4-Channel, 4 ohms      4X300W Bridge -stereo, Sohms  2X600W Performance Sensitivity (volts RMS) for full rated power at 8 ohms    0.775V Frequency Response (at 1 watt,20Hz - 25kHz)    + OdB, -0.5dB Phase Response (at 1 watt, 20Hzto20 kHz)    + 10' ,-20" Signal to Noise Ratio below rated power A-weighted    >100dB Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 20 kHz    sSO.1% Interrnodulation Distortion (IMD) 60 Hz and 7kHz at 4:1 .fromfull rated outputto -35 dB    sSO.05% Damping Factor (8ohm): 20 Hzto 400 Hz    ^200 Input Impedance (nominallybalanced, nominally unbalanced)    20 kilohms, lOkilohms Performance Load Impedance (Note: Safe withall types ofloads) 4-Channel Bridge-Stereo     4-8 ohms 8 ohms AC Line Voltage and Frequency Configurations Available (+10%)         -220-240 V and50/60 Hz AC Line Current (both amplifiers draw no more than 90 wattsat idle)      8A     Construstion Ventilation       Flow-through ventilation fromfront to back Cooling           Proportional speed fan Dimensions        H x W x D: 89mmX483mmx496mm Net Weight/Shipping Weight       16kg/19kg