DMX Common Controller
DMX controller adopts the advanced micro control unit it, receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures. i
DMX controller is designed to convert the universal standard DMX512/1990 signal into analog signal to control our RGB Flex Strips, it allows user to choose 1~3 output channel, with 256-level brightness control. This decoder connects to and can be controlled by DMX Light Boards, our DMX Touch Controllers or other DMX Controllers/DMX Computer Interfaces allowing its user to create endless possibilities of light shows.
Details:

DC imput 12V
Output Current：5A per channel（total current: 15A）
Output Power：75W（5V）180W(12V) 360W(24V)
Brightness Control ：256 256 levels
DMX Address：3 channels
DMX512 Standard：DMX512/1990
Product Dimension：125x66x54 mm
Weight：0.3KG

Ⅱ. Basic Functions 1.) 256 steps of smooth brightness adjusting. 2.) User addressable DMX interface-with easy dip-switch settings and testing modes. 3.) High power output, 3 output channels. 4.)DMX pass through and in/out connector for daisy chain configurations.
Additional Information




Product Highlights

It has built in testing or stand alone features. Just turn on the last dip switch labeled (fun) to enable stand alone mode (when you don't have a DMX signal or for testing). By using different combinations of the dip switches, you can set the color or fade/flash modes and adjust the speed.



Led Color
RGB


Mounting Options
Wall Mount, Other


Voltage
12V


Wattage
5A/Ch


Number Of Chanels
3


Rated Amps / Ch
5A/Ch


Recommended Power Supply Size
12-180 Watt / 1-15 Amp Depending on connected strip length


Connections Input/Output

DMX Connections 1x 3-Pin XLR Input 1x 3-Pin XLR Output
Output Connections (To Strips) Ch 1 = Red (red wire) Ch 2 = Green (green wire) Ch 3 = Blue (blue or white wire) Com = + (black wire)



Power Input: Connection Type, Voltage, Amperage
(Plug-able Screw Terminal Strip) DC5V-DC24V (+)/(-) note for 12v strips use 12v input


Output Connection Type
(Plug-able Screw Terminal Strip)


Can Power/Control (xx) Feet of strip
Up to 80' of RGB Flex Strip or 5A/Ch


Controllable By
DMX or built in Fun/Test Mode Switch


Number Of Control Modes
Full Control with DMX or 7 Static, 1 Fade and 1 Flash in Fun/Test Mode


Steps of Speed Adjustment
Full Control with DMX or 7 Steps in Fun/Test Mode


Dimmable Range / Steps
0-100% via DMX in 256 steps


Wire Color Code Chart

Output Connections

Ch 1 = Red (red wire)
Ch 2 = Green (green wire)
Ch 3 = Blue (blue/white wire)
Com = + (black wire)




Comes With
Includes solder on Male+Female DMX 3pin Jacks


Suggested Accessories

Female Barrel Connector for easy connection to out Power Supplies Control Cable for connecting to distant Flex Strips



Available Options (may not be in stock)

4x Chanel Version for RGBW or RGBA or Custom Single Color Applications 4A/Ch We can coat circuit board with a water resistant coating for outdoor use. Constant Current 350 or 700mA version for driving High Power Star type emitters