+
−
FBT SUBLINE 112SA
Šifra: 12446
Na stanju
950,00 EUR
PDV uračunat u cijenu
Prikazana cijena je za komad.
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
The SUBline series has been completely redesigned and consists of 112SA, 115SA, 118SA, 218SA active and 118S and 218S passive subwoofer models, all bass-reflex , built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.
- Bass-reflex design with high SPL and punch
- 320mm (12”) high excursion magnet woofer with 75mm (3”) voice coil
- Frequency response from 40Hz to 140Hz
- New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
- Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
- Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
- 15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
- M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
| Code: | 41223 |
| Configuration: | 1 way |
| Built-in amplifier LF/HF: | 700 W RMS |
| Built-in amplifier peak LF/HF: | 1400 W |
| Frequency response: | 42Hz - 140Hz -6dB |
| Low Frequency woofer: | 12 - 2.5 coil inch |
| Maximum SPL cont/peak: | 129/133 half-space dB |
| Dispersion: | omnidirectional HxV |
| Input impedance: | 22 Kohm |
| Crossover Frequency: | 90 or 140Hz KHz |
| AC Power requirements: | 640 VA |
| Input connector: | stereo XLR with loop, HP out |
| Power cord: | 5/16.4 m/ft |
| Net Dimension (WxHxD): | 430x447x480 / 16.9x21.5x18.9 mm/inch |
| Net Weight: | 23./50.7 kg/lb |
| Transport Dimension (WxHxD): | 530x547x580 / 20.9x21.5x22.8 mm/inch |
| Transport Weight: | 27/59.5 Kg/lb |
Ocena:
Vezani artikli
Srodni proizvodi
