.png){kind=logo}
+
−
EMINENCE THE TONKER- ugradbeni zvučnik
Šifra: 6251
Na stanju
Regularna cijena:
159,00 EUR
Cijena sa popustom *
Cijena za kupovinu na rate:
Cijena sa popustom *
135,00 EUR
PDV je uračunat u cijenu
Iznos rate:
*Akcijska cijena (cijena sa popustom) vrijedi isključivo za plaćanje gotovinom, virmanom (uplatom na račun) ili jednokratnim plaćanjem debitnom ili kreditnom karticom. Navedeni uvjeti odnose se na ostvarivanje akcijske cijene te ne predstavljaju pravo na dodatni popust.
Prikazana cijena je za komad.
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
EMINENCE THE TONKER
150W, 8 ohm
| SPECIFICATION | |
| Nominal Basket Diameter | 12", 304.8mm |
| Nominal Impedence* | 8 ohms |
| Power Rating** | |
| Watts | 150W |
| Music Program | N/A |
| Resonance | 89Hz |
| Usable Frequency Range | 70Hz - 5.5kHz |
| Sensitivity*** | 102dB |
| Magnet Weight | 59 oz. |
| Gap Height | 70Hz - 5.5kHz |
| Voice Coil Diameter | 0.31", 7.92mm |
|
THIELE & SMALL PARAMETERS |
|
| Resonant Frequency (fs) | 89Hz |
| DC Resistance (Re) | 7.36 |
| Coil Inductance (Le) | 0.47mH |
| Mechanical Q (Qms) | 10.02 |
| Electromagnetic Q (Qes) | 0.49 |
| Total Q (Qts) | 0.47 |
| Compliance Equivalent Volume (Vas) | 34.1 liters / 1.2 cu.ft. |
| Peak Diaphragm Displacement Volume (Vd) | 42cc |
| Mechanical Compliance of Suspension (Cms) | 0.09mm/N |
| BL Product (BL) | 17.4 T-M |
| Diaphragm Mass Inc. Airload (MMs) | 36 grams |
| Efficiency Bandwidth Product (EBP) | 181 |
| Maximum Linear Excursion (Xmax) | 0.8mm |
| Surface Area of Cone (Sd) | 519.5 cm2 |
| Maximum Mechanical Limit (Xlim) | N/A |
|
MOUNTING INFORMATION |
|
| Recommended Enclosure Volume | |
| Sealed | Acceptable |
| Vented | Acceptable |
| Driver Volume Displaced | 137.3 cu.in. / 2.25 liters |
| Overall Diameter | 12.02", 305.3mm |
| Baffle Hole Diameter | 10.97", 278.6mm |
| Front Sealing Gasket | Fitted as standard |
| Rear Sealing Gasket | Fitted as standard |
| Mounting Holes Diameter | 0.25", 6.4mm |
| Mounting Holes B.C.D. | 11.63", 295.4mm |
| Depth | 5.2", 132mm |
| Net Weight | 11.1 lbs, 5 kg |
| Shipping Weight | 13.2 lbs, 6 kgs |
|
MATERIALS OF CONSTRUCTION |
|
| Coil Construction | Copper voice coil |
| Coil Former | Polyimide former |
| Magnet Composition | Ferrite magnet |
| Core Details | Non-vented core |
| Basket Materials | Pressed steel basket |
| Cone Composition | Paper Cone |
| Cone Edge Composition | Paper cone edge |
| Dust Cap Composition | Zurette dust cap |
Ocena:
Potvrdite da niste robot
